Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 91

Page: 91 / 160

Troubleshooting

Paper Drawers

Check the location of the paper jam, and follow the procedure described below, and the procedure that appears on the

touch panel display, to remove the jammed paper.

For information on the paper jam removal procedure for paper drawer 1, follow the procedure from step 3.

Remove any jammed paper inside the paper drawer’s upper right cover.

1. Grip the handle, and open the paper

drawer’s upper right cover.

2. Remove any jammed paper.

3. Close the paper drawer’s upper right

cover.

Gently close the paper drawer’s right cover until it clicks into place in the closed position.

Remove any jammed paper inside the lower right cover of the main unit.

1. Grip the handle, and open the lower

right cover of the main unit.

2. Remove any jammed paper.

3. Close the lower right cover of the

main unit.

Gently close the lower right cover until it clicks into place in the closed position.

When closing the lower right cover of the main unit, be careful not to get your fingers caught, as

this may result in personal injury.

When closing the paper drawer's upper right cover, be careful not to get your fingers caught, as

this may result in personal injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands