Canon imageRUNNER Advance C2020i Basic Operation Manual Download

Page: 84 / 160

Main Unit

Check the location of the paper jam, and follow the procedure described below, and the procedure that appears on the

touch panel display, to remove the jammed paper.

When No Optional Tray or Finisher Is Attached

If the optional Inner 2 Way Tray-F1, Copy Tray-J1, or Inner Finisher-C1 is not attached, follow the instruction below to

remove jammed paper.

If paper is loaded in the multi-purpose tray, make sure to remove any paper from the multi-purpose tray first.

Open the paper drawer's upper right cover and lower right cover

→

check for

paper jams.

1. Open the paper drawer’s lower right

cover.

2. Open the paper drawer’s upper right

cover.

If there is any jammed paper, remove it

→

close the covers.

Gently close the upper right cover and lower right cover until they click into place in the closed positions.

Remove any jammed paper inside the lower right cover of the main unit.

1. Grip the handle, and open the lower

right cover of the main unit.

2. Remove any jammed paper inside

the lower right cover of the main

unit.

When closing the covers, be careful not to get your fingers caught, as this may result in personal

injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands