Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 136

Page: 136 / 160

Q20

Can I restrict the number of colour copies/prints?

If Department ID Management is used, you can restrict the colour output within groups.

Setting the Department ID Management and Registering the

Password:

1. Press

2. Press [Management Settings]

→

[User Management]

→

[Department ID

Management].

3. Press [On]

→

[Register PIN]

→

[Reg.].

4. Enter the Department ID and password

→

press [OK].

●

Setting the Page Limits:

1. Press

2. Press [Management Settings]

→

[User Management]

→

[Department ID

Management].

3. Press [On]

→

[Register PIN]

→

[Reg.].

4. Press [Turn Limits On/Off and Set Page Limits]

→

specify the page limit

settings

→

press [OK].

●

To perform this procedure, you must log in as an administrator. For more information, see e-Manual > Security.
You can also change the default settings for the Copy screen from Colour to Black mode. For more information, see p. 129 in this manual.

•
•

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands