Replacing the Toner Cartridge
When there is only a small amount of toner remaining inside the machine, the message appears on the touch panel
display. You can continue printing, but at this time you should purchase a new toner cartridge to have it available when
needed.
When the toner run out completely and prints can no longer be made, a screen with instructions on how to replace the
toner cartridge appears on the touch panel display. Follow the procedure described below to replace the toner cartridge.
If you press [Close], you can continue operations, such as setting modes and scanning originals, even if you do not replace
the toner cartridge immediately.
Use only toner cartridges intended for use with this machine.
Do not replace toner cartridges until the message prompting you to do so appears.
Do not attempt to replace the toner cartridge while the machine is printing.
When the message <Black Toner is low. Replacement not yet needed.> appears, approximately 1,000 pages can be
printed. It is recommended that you get a new toner cartridge ready for replacement before the toner runs out.
Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the
touch panel display.
If toner runs out during a print job, the remaining prints are made after you replace the toner cartridge.
•
•
•
•
•
•
Keep toner out of the reach of small children.
If toner is ingested, consult a physician immediately.
Take care not to allow toner to come into contact with your hands or clothing. If toner gets onto your
hands or clothing, wash it off immediately with cold water. Washing it off with warm water will set the
toner, and make it impossible to remove the toner stains.
•
•
•
Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or a fire.
