Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 73

Page: 73 / 160

Routine M

ain
tenanc

Insert the new toner cartridge.

1. Align the arrow on the ring near

the end of the new toner cartridge

with the arrow on the toner inlet

of the machine, as indicated in the

diagram.

2. Push the new toner cartridge in as

far as possible.

Support the new toner cartridge with your hand from underneath while pushing it into the machine with

your other hand.

Close the covers.

1 Close the cover for the toner

cartridge you replaced.

2 Close the front cover of the main

unit.

When closing the covers, be careful not to get your fingers caught, as this may result in personal

injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands