Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 78

Page: 78 / 160

Clean the transparent plastic area on top of the inner cover.

1. Clean the plastic area.

2. Close the inner cover, and then close

the feeder cover.

Clean the feeder’s scanning area.

1. Open the feeder.

2. Clean the feeder’s scanning area.

Clean the resin roller and the surrounding area.

1. Turn the resin roller while turning

the feed dial.

2. Clean the area while turning the

resin roller.

3. Close the feeder.

When closing the feeder, be careful not to get your fingers caught, as this may result in personal

injury.

When closing the covers, be careful not to get your fingers caught, as this may result in personal

injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands