Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 63

Page: 63 / 160

Routine M

ain
tenanc

Loading the Envelope after Specifying the Size

This section explains how to load the envelopes that are specified in Settings/Registration into the envelope cassette.

Make sure that you change the envelope settings from the Settings/Registration screen before carrying out the following

procedure. (See e-Manual > Settings/Registration.) Otherwise, the machine may not recognize the changes you have made.

Open the drawer.

1. Press and release the button on

Paper Drawer 2.

2. Grip the handle, and pull out the

paper drawer until it stops.

Remove the drawer and envelopes.

1. Pull and lift the paper drawer out of

the machine by holding its left and

right sides with both hands.

2. Remove the envelopes that are

loaded in the paper drawer (several

envelopes at a time).

Slide the left guide to align it with the mark for the desired envelope size.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands