Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 92

Page: 92 / 160

Remove any jammed paper inside the paper drawer.

1. Press and release the button on the

paper drawer.

2. Grip the handle, and pull out the

paper drawer until it stops.

3. Remove any jammed paper.

Gently push the paper drawer back into the machine until it clicks into place in

the closed position.

Follow the instructions on the touch panel display.

The screen indicating the location of the paper jam repeatedly appears on the touch panel display until the

paper jam is entirely cleared.

Cassette Feeding Unit-AF

Check the location of the paper jam, and follow the procedure described below, and the procedure that appears on the

touch panel display, to remove the jammed paper.

The Cassette Feeding Unit-AF1 is an optional product.

Open the paper drawer’s upper right cover and lower right cover.

1. Open the paper drawer’s lower right

cover.

2. Open the paper drawer’s upper right

cover.

When returning the paper drawer to its original position, be careful not to get your fingers

caught, as this may result in personal injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands