Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 41

Page: 41 / 160

Things

You C
an Do with the S

can and S

e F

unc
tions

[File Format]

Specify the File Format and Scan

You can set a file format, such as a PDF format to the scanned
document so that it can be accessed from your computer.

[File Name]

Specify the File Name and Scan

You can specify a file name for the data to be scanned.

[Original Type]

Scan Photos Clearly

Image quality for scanning is adjusted according to the type of
original, such as [Text], [Text/Photo/Map], or [Photo Printout].

[Back to Default Set]

Clear the Settings

This mode is useful if you want to clear all settings and reset the
settings. All settings are cleared.

[2-Sided Original]

Automatically Scan Front and Back Sides of Documents

Set to scan two-sided originals. You can select [Book Type] or
[Calendar Type].

[Copy Ratio]

Changing the Scan (Zoom) Ratio

You can change the scan (zoom) ratio by enlarging/reducing a
scanned document to a preset paper size, or by entering a value to
specify a desired scan ratio.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands