Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 146

Page: 146 / 160

Q35

The touch panel display is completely black.

The main power has not been turned ON, or the machine may have entered the Auto Sleep mode to save energy. Follow the procedure
below.

Turning the Main Power ON:

1. Check whether the power plug is firmly inserted into the outlet.
2. Open the main power switch cover located on the right side of the machine and

switch the main power switch to the "I" side to turn the power ON.

●

Recovering from the Auto Sleep Mode:

Press the control panel power switch.

For more information on sleep mode, see e-Manual > Basic Operations.
Follow the procedure below to change the Auto Sleep Time.

1. Press

2. Press [Preferences]

→

[Timer/Energy Settings]

→

[Auto Sleep Time].

3. Specify the time

→

press [OK].

●

•
•

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands