Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 81

Page: 81 / 160

Routine M

ain
tenanc

Consumables

The following consumables are available from Canon. For more information, contact your local authorized Canon dealer.

We recommend that you order paper stock and toner from your local authorized Canon dealer before your stock runs out.

Recommended Paper

In addition to plain paper A3, A4, and A5, recycled paper, colour paper, transparencies (recommended for this

machine), tracing paper, labels, and other types of paper stock are available.

●

To prevent moisture build-up, tightly wrap any remaining paper in its original package for storage.

Some commercially available paper types are not suited for this machine. Contact your local authorized Canon dealer

when you need to purchase paper.

For high-quality printouts, use paper recommended by Canon.

Toner

If a message prompting you to replace the toner cartridge appears on the touch panel display, replace the used toner

cartridge with a new one.

Cyan Toner, Magenta Toner,

Yellow Toner

Black Toner

•

●

Store toner cartridges in a cool location, away from direct sunlight. (The recommended storage conditions are:

temperatures below 30 °C, and humidity below 80 %.)

[Be careful of counterfeit toners]

Please be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner may result in poor print quality or machine performance.

Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner.

For more information, see http://www.canon.com/counterfeit.

•

Keep toner out of the reach of small children. If toner is ingested, consult a physician immediately.

Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining

inside the cartridges to ignite, resulting in burns or a fire.

Do not store toner cartridges in places exposed to open flames, as this may cause the toner to ignite,

resulting in burns or a fire.

•

Do not store paper in places exposed to open flames, as this may cause the paper to ignite, resulting in

burns or a fire.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands