Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 576 / 651

Detailed Discussions of Bit 1
Select whether to execute V.8 procedure when receiving a call.
"No": V.8 procedure is not executed, and the procedure starts from V.21.
Detailed Discussions of Bit 2
Select whether to execute V.8 procedure when ANSam signal from the receiver side cannot be recognized at the time of
making a call and V.8 procedure is declared by DIS signal from the receiver side.
"Yes": CI signal is sent in response to the DIS signal of the receiver side to execute the V.8 procedure.
"No": CI signal is not sent in response to the DIS signal of the receiver side, and the V.21 procedure is executed.
In the case of manual transmission, there will be no V.8 late start regardless of this setting.
Detailed Discussions of Bit 3
Select whether to declare the existence of the V.8 procedure with the DIS signal that is transmitted after the ANSam signal
in case that the ANSam signal at the reception is not recognized at the caller side.
"Yes": V.8 procedure is declared by DIS signal and V.8 procedure is executed after CI signal is sent from the caller side.
"No": V.8 procedure is not declared by DIS signal, and V.21 procedure is executed.
In the case of manual transmission, there will be no V.8 late start regardless of this setting.
Detailed Discussions of Bit 4
Select whether to prohibit fallback from the V.34 receiver side.
"Prohibit": There will be no fallback from the receiver side.
● SSSW-SW30
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 Not used - -
5 Switching the dial tone detection method - New detection method
6 Flow control between pages Control Do not control
7 Not used - -
Detailed Discussions of Bit 5
Switch the detection method when executing the dial tone detection at the time of calling.
0: New detection method (default)
1: Not used
Detailed Discussions of Bit 6
Select whether to execute flow control between pages.
● SSSW-SW50
Functional Construction
Bit Function 1 0
0 Transmission number restriction: Function to prevent no external access
code *2 ON: Enable OFF: Disable
1 Transmission number restriction: Extension allowance, prohibition *2 Prohibited Allow
2 Transmission number restriction: Add "0" to the first digit of external ac-
cess code *2 Yes No
3 Operate as the client of a fax server *1 *a Yes No
4 Display the send job stop confirmation screen when pressing Stop key *2 No Yes
5 Send jobs that are targeted to stop when pressing Stop key *2 Ongoing send job Incomplete send job
6 not used - -
7 not used - -
*1: Supported by the platform version 306 or later
*2: Supported by the platform version 307 or later
8. Service Mode
566