Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 341 / 651

43-0076 Fixing Assembly replacement completion alarm
A. Operation / B. Cause /
C. Remedy
The counter of the Fixing Assembly was cleared.
43-0080 CST1 Pickup/Feeding Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
The counter of the CST1 Pickup/Feeding Roller was cleared.
43-0083 CST2 Pickup/Feeding Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
The counter of the CST2 Pickup/Feeding Roller was cleared.
43-0086 CST3 Pickup/Feeding Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
The counter of the CST3 Pickup/Feeding Roller was cleared.
43-0089 CST4 Pickup/Feeding Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
The counter of the CST4 Pickup/Feeding Roller was cleared.
43-0092 ADF Separation Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
Pushed was a replacement completion button of ADF Separation Roller
Counter was cleared.
43-0125 ADF Pickup Roller replacement completion alarm
A. Operation / B. Cause /
C. Remedy
Pushed was a replacement completion button of ADF Pickup Roller
Counter was cleared.
50-0010 Alarm due to original separation failure
A. Operation / B. Cause /
C. Remedy
Movement: Nothing in particular.
Cause: Condition unable to separate 1st sheet of original from the ADF occurs 3 times.
Measures: Check the rotation of the Delivery Reversal Motor (M12) -> Check the operation of the
Pickup Solenoid (SL5) -> Check the life of the Pickup and Feed Rollers and Separation Pad ->
Check if the paper lint is at the pickup slot.
50-0015 Failure of the ADF Double Feed Sensor
A. Operation / B. Cause /
C. Remedy
Cause:
Failure of the Double Feed Sensor installed in the ADF
Detection condition/timing:
- When a paper feed error of the Double Feed Sensor was detected at power-on
- When an error of the output value of the Double Feed Sensor was detected during ADF job (While
an ADF job is being executed, it is handled as a jam once and retry is performed.)
Clearing condition:
- When communication and the sensor output value are normal at power-on
Movement/symptom: "Check area where multi. sheet feed was detected. (Call serv. rep.)" is
displayed in the status line. Although reading from the ADF is possible, double feed cannot be
detected when it occurs.
Measures:
Check for any foreign matter, clean paper lint, disconnect and then connect the connectors, replace
the Double Feed Detection PCB, replace the RCON/DF Driver PCB, replace the harnesses
60-0001 Shift Tray alarm
A. Operation / B. Cause /
C. Remedy
Movement: Shift Tray operation is stopped.
Cause: Home position at startup of the host machine cannot be detected.
Measure: Check connector disconnection of the HP Sensor (Front) (PS101) and the HP Sensor
(Rear) (PS102) -> Replace the HP Sensor (Front) (PS101) and the HP Sensor (Rear) (PS102).
70-0086 For R&D
A. Operation / B. Cause /
C. Remedy
7. Error/Jam/Alarm
331