Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 575 / 651

Bit Function 1 0
2 Not used - -
3 Not used - -
4 Not used - -
5 Firmware automatic update (USB Fax) Prohibit Do not prohibited
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 0
Select a phone number to be indicated on the report after transmission is completed.
Caller's number: To display the caller's phone number on the report
Receiver's number: To indicate the phone number (CSI signal data) sent from the other party's machine on the report
Detailed Discussions of Bit 5
Select whether to prohibit the firmware automatic update for USB Fax.
● SSSW-SW26
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Check the sequential broadcast. Check Do not check
3 Not used - -
4 Not used - -
5 Redial function when transmission error occurs Use Do not use
6 Not used - -
7 Error report when sending process is canceled Do not output Output
Detailed Discussions of Bit 2
Select whether to display a confirmation message when entering destination for the sequential broadcast in order to prevent
the user from broadcasting by mistake.
Detailed Discussions of Bit 5
Select whether to use the redial function when outgoing transmission error occurs.
Detailed Discussions of Bit 7
Select whether to output an error report when the [Stop] key is pressed to cancel sending.
● SSSW-SW28
Functional Configuration
Bit Function 1 0
0 V.8 procedure at the caller side No Yes
1 V.8 procedure at the receiver side No Yes
2 V.8 late start at the caller side No Yes
3 V.8 late start at the receiver side No Yes
4 Fallback from the V.34 receiver side Prohibit Do not prohibit
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 0
Select whether to execute V.8 procedure when making a call.
"No": V.8 procedure is not executed even if V.8 procedure is received from the receiver side, and the procedure starts from
V.21.
8. Service Mode
565