Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 467 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
DCONRTRY 2 Set of retry at DCON comctn error occur
Detail To set whether to perform retry processing when communication error occurs between the Main
Controller and the DC Controller.
Set 1 to 3 when E733 occurs. Communication error may be avoided by retry. (It is effective
especially when E733-0001/0002/0005 occurs.)
If communication error occurs during finishing job while 3 is set, duplicated pages may be output
due to retry. In such case, set 0 to 2. Since retry is not performed during finishing job, duplication
of pages does not occur, but E733 occurs.
Use Case When E733 occurs
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 3 is set, duplication of pages may occur during finishing job.
Display/Adj/Set Range 0 to 3
0: OFF
1: OFF during job, ON in other states
2: OFF during finishing job, ON in other states
3: ON
Default Value 1
Supplement/Memo Finishing job: Job that 2-sided print, binding and/or collate set in "Finishing" of the printer driver.
FL-START 2 [For customization]
FIX-DLV 1 Set arr alm thrshld of Fixing Ass'y
Detail To set the timing to notify the Fixing Assembly LF setting value arrival alarm.
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 50 to 1000
Default Value 100
3RDP-MSG 2 ON/OFF pop-up screen dspl after upgrade
Detail To set whether to display the screen to prompt the user to "Third-Party Software" at the first startup
after upgrading due to change in the platform version.
Use Case
There will be no occasion to use this item intentionally.
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Even if 0 is set, the screen is displayed if CDS-LVUP is set to 0.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value 0
Related Service Mode COPIER> OPTION> FNC-SW> CDS-LVUP
TRR-DLV 1 Set Trn Rol LF set VL arr alm notice tmg
Detail To set the timing to notify the transfer roller LF setting value arrival alarm.
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 50 to 1000
Default Value 100
C1F-DLV 1 Set arr alm thrshld of CST1 Feed Roller
Detail To set the timing to notify the Cassette 1 Transfer Roller LF setting value arrival alarm.
Use Case
When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
50 to 1000
Default Value
100
8. Service Mode
457