Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 574 / 651

Detailed Discussions of Bit 3
Number of command retransmission
1: 6 times
0: 3 times
Detailed Discussions of Bit 4
Set whether to request retransmission of all frames after frame loss at JBIG reception
1: Yes
0: No
● SSSW-SW22
Functional Construction
Bit Function 1 0
0 Backup when an archive transmission error occurs Use Do not use
1 Not used - -
2 Not used - -
3 Prohibit manual polling operation - -
4 Not used - -
5 Not used - -
6 Archive transmission function Enabled Disabled
7 Not used - -
Detailed Discussions of Bit0
Select whether to back up data when a communication error occurs during archive transmission.
This function is available on the Platform Version 3.6 or later.
Detailed Discussions of Bit3
Set whether to prohibit of manual polling operation
Detailed Discussions of Bit 6
Set whether to send the sent images to the destination specified by the forwarding function.
● SSSW-SW23
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Prohibit to rotate A4 or larger paper in portrait position by 180 degrees - -
3 Not used - -
4 Not used - -
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussion of Bit 2
Set whether to add header with or without rotating the image by 180 degrees when A4 or larger paper is placed in the feeder
in portrait position (R position).
1: Yes
0: No
● SSSW-SW25
Functional Construction
Bit Function 1 0
0 Sender's phone number indicated in the report Receiver's number Caller's number
1 Not used - -
8. Service Mode
564