Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 497 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
MB-CCV 2 Control card usage limit for Mail Box
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of control card for Mail Box.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Unlimited, 1: Limited
Default Value 1
CONTROL 1 Charge setting of PDL job
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set charge count transmission of PDL job to the connecting charging management device (Coin
Manager or non-Canon-made control card).
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: No charge, 1: Charge
Default Value
0
Related Service Mode
COPIER> OPTION> ACC> COIN
CNT-DISP 2 Display/hide of serial No.
Detail To set whether to display or hide the serial No. on the Counter Check screen.
Use Case When setting to display/hide serial No. on the Counter Check screen.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
PH-D-SEL 2 Set dither matrix at screen processing
Detail To set the screen dither matrix to be used for halftoning processing at the time of copy output,
B&W Inbox scan output and B&W SEND output.
When moire occurs frequently, set to 1.
When the setting is changed, the number of PG lines to be output at PASCAL control is also
changed.
Use Case When moire frequently occurs at the time of copy output, B&W Inbox scan output and B&W SEND
output. Especially when moire frequently occurs in the halftone density area of photo and image
gradation areas
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: 134 lines, 1: 141 lines
Default Value
0
Related Service Mode
COPIER> OPTION> USER> PH-D-SL2
COPY-JOB 1 Setting of copy job reservation
Detail To set to enable/disable copy job reservation when the Card Reader/Coin Manager is used.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Enabled, 1: Disabled
Default Value 0
8. Service Mode
487