Canon imageRUNNER ADVANCE 525 I, Service Manual

Page: 573 / 651

NOTE:
Turn OFF and then ON the power of the host machine after the setting.
● SSSW-SW14
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 inch-configuration resolution declaration Yes No
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 4
At the time of G3 communication, select whether to declare inch-configuration resolution to the other party's machine. if
'declare' is selected, the machine will indicate that it reads and records at an inch-configuration resolution using the DIS,
DCS, or DTC signal.
● SSSW-SW17
Functional Construction
Bit Function 1 0
0 Not used - -
1 To select the transmission level of the modem 0 to 15 8 to 15
2 Not used - -
3 Not used - -
4 Not used - -
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 1
Select the transmission level of the modem.
● SSSW-SW18
Functional Construction
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Prohibition of the control of IP supported communication Yes No
3 Number of command retransmission (V1.7 or earlier) 6 times 3 times
4 Request retransmission of all frames after frame loss at JBIG reception Yes No
5 Not used - -
6 Not used - -
7 Not used - -
Detailed Discussions of Bit 2
Set whether to prohibit the control of IP supported communication
1: Yes
0: No
8. Service Mode
563