Canon imageclass LBP251dw User Manual Download Page 36

Page: 36 / 495

Using the Operation Panel

0W20-086

Use the keys shown below to specify settings and adjust values.

Using

Scrolling the Screen

The scroll bar is displayed on the right side of the screen when not all of the information fits on one screen. If

the scroll bar is displayed, use

to scroll up or down. The text and background colors of an item are

inverted when it is selected.

Changing a Setting Value

Use

to enter values. If an icon such as below is displayed at the upper left of the screen, you can

enter values directly using the numeric keys. Entering Text(P. 32)

Values in ( ) displayed below the entry box are the enterable value range.

Using

Proceeding to the Next Screen/Returning to the Previous Screen

Press

to proceed to the next screen. Press

to return to the previous screen.

Basic Operations

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands