Canon imageclass LBP251dw User Manual Download Page 278

Page: 278 / 495

Remote UI Screens

0W20-050

This section describes the typical screens of the Remote UI.

Portal Page (Main Page)(P. 272)
[Status Monitor/Cancel] Page(P. 273)
[Settings/Registration] Page(P. 274)

Portal Page (Main Page)

[Log Out]

Logs off from the Remote UI. The Login page will be displayed.

[Mail to System Manager]

Displays a window for creating an e-mail to the system manager specified in [System Manager Information]

under [System Management].

Refresh Icon

Refreshes the currently displayed page.

Device Basic Information

Displays the current status of the machine and error information. If an error has occurred, the link to the

Error Information page will be displayed.

Consumables Information

Displays paper information and the amount remaining in the toner cartridge.

Using Remote UI

272

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands