Canon imageclass LBP251dw User Manual Download Page 232

Page: 232 / 495

Changing Port Numbers

0W20-048

Ports serve as endpoints for communicating with other devices. Typically, conventional port numbers are used for

major protocols, but devices that use these port numbers are vulnerable to attacks because these port numbers are

well-known. To enhance security, your Network Administrator may change the port numbers. When a port number has

been changed, the new number must be shared with the communicating devices, such as computers and servers.

Specify the port number settings depending on the network environment.

●

To change the port number for proxy server, see Setting a Proxy(P. 228) .

Press

Use

to select <Network Settings>, and press

●

If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press

Logging on to the Machine(P. 34)

Select <TCP/IP Settings> <Port Number Settings>.

Select a port, and press

Learning more about the ports

●

<LPD>/<RAW>/<WSD Multicast Discovery> Configuring Printing Protocols and WSD Functions(P. 165)

●

<HTTP> Disabling HTTP Communication(P. 232)

●

<SNMP> Monitoring and Controlling the Machine with SNMP(P. 191)

●

<Multicast Discovery> Configuring Settings for Device Management Software(P. 196)

Enter the port number using the numeric keys, and press

Restart the machine.

●

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

Security

226

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands