manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 95

95

You can select one of four methods to measure the subject brightness. 
In the fully-automatic modes (

1

/

C

), evaluative metering is set 

automatically.

1

Press the <

n

> button. 

(

9

)

2

Select the metering mode.

 

While looking at the LCD panel, turn 
the <

6

> dial.

q

 Evaluative metering

This is an all-around metering mode suited for 
portraits and even backlit subjects. The camera 
sets the exposure automatically to suit the scene.

w

 Partial metering

Effective when the background is much brighter 
than the subject due to backlighting, etc. Partial 
metering covers about 8% of the viewfinder area at 
the center.

r

 Spot metering

This is for metering a specific part of the subject or 
scene. The metering is weighted at the center 
covering about 3.5% of the viewfinder area.

e

 Center-weighted average metering

The metering is weighted at the center and then 
averaged for the entire scene.

q

 Selecting the Metering Mode

N

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands