manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 230

230

Troubleshooting Guide

 

Make sure the stereo video cable or HDMI cable’s plug is connected 
all the way in (p.157,158).

 

Set the video OUT format (NTSC/PAL) to the same video format as 
the TV (p.221).

 

Use the stereo video cable that came with the camera (p.157).

 

If you selected [

Clean now

f

], the shutter will make a shutter sound 

two times (p.166).

 

The printing effects displayed may differ depending on the printer. The 
instruction manual lists all the printing effects available (p.176).

No image appears on the TV screen.

Sensor Cleaning Problems

The shutter makes a noise during sensor cleaning.

Printing-Related Problems

There are fewer printing effects than listed in the instruction 
manual.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands