manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 46

46

Before You Start

If you use EOS Utility (provided software) to set your copyright 
information, the copyright information will be added to the image’s Exif 
information. With the camera, the copyright information can only be 
viewed or deleted. If your copyright information has not been set, it will 
be grayed out on the screen and unusable.

 

With the [

Clear settings

] screen 

displayed, press the <

B

> button to 

display the copyright information.

 

Press the <

M

> button to return 

to the [

Clear settings

] screen.

 

To delete the copyright information, 
select [

Delete copyright 

information

] on the [

Clear settings

] 

screen.

3

 About Copyright Information

N

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands