manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 50

50

Depending on the scene, position the subject toward the left or right to 
create a balanced background and good perspective.
In the <

1

> (Full Auto) mode, while you press the shutter button 

halfway to focus a still subject, the focus will be locked. You can then 
recompose the shot and press the shutter button completely to take the 
picture. This is called “focus lock”.

In the <

1

> (Full Auto) mode, if the subject moves (distance to camera 

changes) during or after you focus, AI Servo AF will take effect to focus 
the subject continuously. As long as you keep aiming the AF point on 
the subject while pressing the shutter button halfway, the focusing will 
be continuous. When you want to take the picture, press the shutter 
button completely.

1

 Full Auto Techniques

Recomposing the Shot

Shooting a Moving Subject

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands