Canon EOS 5D Mark II, Instruction Manual

Page: 176 / 260

176
w Printing
4
Set the printing effects.
Set as necessary. If you need not set
any printing effects, go to step 5.
The screen display may differ
depending on the printer.
Select the option on the upper right,
then press <
0 >.
Select the desired printing effect with
the dial, then press <
0 >.
If the < e > icon is displayed next to
< z >, you can also adjust the
printing effect (p.178).
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 178.
Item Description
E
On
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
corrections.
E Off No automatic correction will be performed.
E Vivid
The image will be printed with higher saturation to produce
more vivid blues and greens.
E NR
The image noise is reduced before printing.
0
B/W
Prints in black-and-white with true blacks.
0
Cool tone
Prints in black-and-white with cool, bluish blacks.
0
Warm tone
Prints in black-and-white with warm, yellowish blacks.
z
Natural
Prints the image in the actual colors and contrast. No
automatic color adjustments will be applied.
z Natural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing
adjustments than with “Natural.”
E Default
The printing will differ depending on the printer. For details,
see the printer’s instruction manual.
COP
Y