Canon EOS 5D Mark II Instruction Manual Download Page 177

Page: 177 / 260

177

Printing

Set the date and file number
imprinting.

Set as necessary.

Select <

>, then press <

Set as desired, then press <

Set the number of copies.

Set as necessary.

Select <

>, then press <

Set the number of copies, then press
<

Start printing.

Select [

Print

], then press <

The <

> button’s blue lamp will

blink and the printing will start.

With Easy printing, you can print another image with the same settings.
Just select the image and press the <

> button lit in blue. With Easy

printing, the number of copies will always be 1. (You cannot set the
number of copies.) Also, any trimming (p.179) will not be applied.

The [

Default

] setting for printing effects and other options are the

printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [

Default

] settings are.

Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [

Print

If image tilt correction (p.179) has been applied, it will take longer to print
the image.

To stop the printing, press <

> while [

Stop

] is displayed, then select

[

COP

Summary of Contents for EOS 5D Mark II





































































































































































































































































Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands

Canon EOS 5D Mark II, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands