manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 92

92

In this mode, you set the desired aperture and the camera sets the 
shutter speed automatically to obtain the correct exposure suiting the 
subject brightness. This is called aperture-priority AE. 
A higher f/number (smaller aperture hole) will make more of the 
foreground and background fall within acceptable focus. On the other 
hand, a lower f/number (larger aperture hole) will make less of the 
foreground and background fall within acceptable focus.

* <

f

> stands for Aperture value (aperture opening).

1

Set the Mode Dial to <

f

>.

2

Set the desired aperture.

 

While looking at the LCD panel, turn 
the <

6

> dial.

3

Focus the subject.

 

Press the shutter button halfway.

X

The shutter speed is set automatically.

4

Check the viewfinder display and 
shoot.

 

As long as the shutter speed is not 
blinking, the exposure will be correct.

f

: Aperture-Priority AE

Sharp foreground and background

(With a small aperture opening)

Blurred background

(With a large aperture opening)

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands