manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 165

165

Sensor Cleaning

The camera has a Self Cleaning Sensor Unit attached 

to the image sensor’s front layer (low-pass filter) to 

shake off dust automatically. 

The Dust Delete Data can also be appended to the 

image so that the dust spots remaining can be erased 

automatically by Digital Photo Professional (provided 

software).

About smear adhering to the front of the sensor

Besides dust entering the camera from outside, in rare cases lubricant 
from the camera’s internal parts may adhere to the front of the sensor. 
In case visible spots still remain after the automatic sensor cleaning, 
having the sensor cleaned by a Canon Service Center is recommended.

Even while the Self Cleaning Sensor Unit is operating, you can 
press the shutter button halfway to interrupt the cleaning and start 
shooting immediately.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands