manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 196

196

3

 Custom Function Settings

N

C.Fn II -3     Highlight tone priority

0: Disable
1: Enable

Improves the highlight detail. The dynamic range is expanded from the 
standard 18% gray to bright highlights. The gradation between the grays 
and highlights becomes smoother.

C.Fn II -4     Auto Lighting Optimizer

If the images comes out dark or the contrast is 
low, the brightness and contrast are corrected 
automatically.
For RAW images, the content of the settings in 
the camera can be applied when processed with 
Digital Photo Professional (bundled software).

0: Standard
1: Low
2: Strong
3: Disable

With setting 1, noise in the shadow areas may be slightly more than usual.

With setting 1, the settable ISO speed range will be 200 - 6400.
Also, <

A

> (dynamic range) will be displayed on the LCD panel and in the 

viewfinder.

Ð

 

Depending on the shooting conditions, noise might increase.

 

This function will not work if manual exposure or bulb exposure has been 
set.

In fully-automatic modes (

1

/

C

), [

Standard

] will be set automatically.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands