manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 151

151

Basically, there are the following three ways to playback the movies you 
shot.

Use the provided stereo video cable or 
HDMI Cable HTC-100 (sold separately) 
to connect the camera to a TV set. You 
can then playback the captured movies 
and photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full HD (Full High-
Definition 1920x1080) movies with 
higher image quality.

You can playback movies on the 
camera’s LCD monitor. You can also 
playback the photos and movies 
recorded in the card as an automatic 
slide show.

k

 Enjoying Movies

Playback on a TV set

(p.157, 158)

Playback on the Camera’s LCD Monitor

(p.153-156)

 

Movies on a card can be played only by devices compatible with MOV 
files.

 

Since hard disk recorders do not have an HDMI IN terminal, the camera 
cannot be connected with an HDMI cable. 

 

Even if the camera is connected to a hard disk recorder with a USB 
cable, movies and photos cannot be played nor saved.

A movie edited with a personal computer cannot be rewritten to the card and 
played back with the camera.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands