manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 132

132

k

 Shooting Movies

3

Set the shutter speed and 
aperture.

 

Press the shutter button halfway and 
check the exposure level indicator.

 

Turn the <

6

> dial to set the shutter 

speed within 1/30 sec. to 1/4000 sec.

 

If you set the power switch to <

J

> 

and turn the <

5

> dial, you can set 

the aperture.

 

Pressing the <

B

> button displays 

the histogram.

4

Focus and shoot the movie.

 

The procedure is the same as steps 2 
and 3 for “Auto Exposure Shooting” 
(p.128).

 

With manual exposure shooting, AE lock and exposure compensation 
cannot be set.

 

Changing the shutter speed or aperture during movie shooting is not 
recommended since variations in the exposure will be recorded.

 

When shooting a movie of a moving subject, a shutter speed of 1/30 sec. 
to 1/125 sec. is recommended. The faster the shutter speed, the less 
smooth the subject’s movement will look.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands