Canon EOS 5D Mark II Instruction Manual Download Page 159

Page: 159 / 260

159

Protecting the image prevents it from being erased accidentally.

Select [Protect images].

Under the [

] tab, select [

Protect

images

], then press <

The protect setting screen will
appear.

Select the image and protect it.

Turn the <

> dial to select the

image to be protected, then press
<

When an image is protected, the
<

> icon will appear on the screen.

To cancel the image protection, press
<

> again. The <

> icon will

disappear.

To protect another image, repeat step
2.

To exit the image protection, press
the <

> button. The menu will

reappear.

Protecting Images

Image protect icon

If you format the card

(p.43)

, the protected images will also be erased.

Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.

If you erase all the images (p.161), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.

COP

Summary of Contents for EOS 5D Mark II





































































































































































































































































Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands

Canon EOS 5D Mark II, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands