Canon EOS 5D Mark II Instruction Manual Download Page 187

Page: 187 / 260

187

Transferring Images to a Personal Computer

Options other than [

All images

] are explained below. To start the image

transfer, press the <

> button.

New images

Images which have not yet been transferred to the personal
computer will be selected by the camera automatically and
transferred.

Transfer order images

You select the images and they are transferred to the personal
computer in a batch. To select the images, see page 188.

Select & transfer

You select the images individually to be
transferred. To exit, press the <

button.

Wallpaper

The image you select and transfer will appear as the personal
computer’s wallpaper. To exit, press the <

> button.

If you press <

> instead of the <

> button, a confirmation dialog

will appear. Select [

], then press <

> to start the transfer.

RAW images and movies cannot be transferred as wallpaper.

COP

Summary of Contents for EOS 5D Mark II





































































































































































































































































Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands

Canon EOS 5D Mark II, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands