Canon EOS 5D Mark II Instruction Manual Download Page 161

Page: 161 / 260

161

Erasing Images

Select [Select and erase images].

Turn the <

> dial to select [

Select

and erase images

], then press

An image will appear.

Press the <

> button to display

the three-image view. To return to the
single-image display, press the <

button.

Select the image to be erased.

Turn the <

> dial to select the

image to be erased, then press
<

The <

> icon will be displayed on

the upper left.

To erase another image, repeat step
3.

Erase the image.

Press the <

> button.

Turn the <

> dial to select [

then press <

The selected image will be erased.

You can erase all the images in a folder or card at one time. When the
[

Erase images

] menu is set to [

All images in folder

] or [

All images

on card

], all the images in the folder or card will be erased.

Erasing All Images in a Folder or Card

COP

Summary of Contents for EOS 5D Mark II





































































































































































































































































Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands

Canon EOS 5D Mark II, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark II

Reviews:

Brands by name

Popular brands