manualshive.com logo in svg

Canon EOS 5D Mark II, Instruction Manual

Share
Download
Canon EOS 5D Mark II Instruction Manual Download Page 93

93

f

: Aperture-Priority AE

Press the depth-of-field preview button 
to stop down the lens to the current 
aperture setting. You can check the 
depth of field (range of acceptable focus) 
through the viewfinder.

Depth of Field Preview

N

 

If the “

30"

” shutter speed blinks, it indicates 

underexposure.
Turn the <

6

> dial to set a larger aperture (smaller  

f/number) until the blinking stops or set a higher ISO 
speed.

 

If the “

8000

” shutter speed blinks, it indicates 

overexposure.
Turn the <

6

> dial to set a smaller aperture (larger  

f/number) until the blinking stops or set a lower ISO 
speed.

Aperture Display

The larger the f/number, the smaller the aperture opening will be. The 
apertures displayed will differ depending on the lens. If no lens is attached to 
the camera, “

00

” will be displayed for the aperture.

 

A higher f/number will make more of the foreground and background fall 
within acceptable focus. However, the viewfinder will look darker.

 

If the depth of field is difficult to discern, hold down the depth-of-field 
preview button while turning the <

6

> dial.

 

The exposure will be locked (AE lock) while the depth-of-field preview 
button is pressed.

COP

Y

Summary of Contents for EOS 5D Mark II





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands