SmartSwitch ATM Switch Reference Manual 3-5
Boot Load Commands
he Command
Examples
=>go s
Bypassing POST
Verifying Checksum of Switch Software...
Attaching network interface ei0... done.
Attaching network interface lo0... done.
0xe054f600 (tRootTask): flashFsLib: Initialized
Initializing Flash File-System
Initializing System
Initializing Hardware
Initializing Alarms, Logging and Tracing
Initializing ILMI
Initializing PM
Initializing Link Daemon
Initializing LANE Servers
NOTICE - 'ZLESSRV' ***** LES started *****
NOTICE - 'tZLinkStatus' Port A1 (1) UP
NOTICE - 'tZLinkStatus' Port A2 (2) UP
Initializing LANE & IP/ATM Client
NOTICE - 'tZLinkStatus' Port C1 (9) DOWN
Initializing Watchdog Timer
After ZKickWatchDog
Console task ID : 0xe04c4cb0
SmartSwitch Command Console
SmartSwitch Version 02.02(31) (c) Cabletron Systems Inc.
password:
he Command
Use
he
to get help on boot load commands or show list of all boot load commands. The question mark (
?
) can be
entered in place of
he
.
Examples
=>he chpi
chpi [option]
option: 0 ..changes the Boot Load default to be Boot Load Software0;
1 ..changes the Boot Load default to be Boot Load Software1
Changes Boot Load default to be Boot Load Software (0) or (1)
Parameter
Explanation
[<command>]
Explain designated boot load command.
none
Show list of all boot load commands.
