SmartSwitch ATM Switch Reference Manual 1-5
Introduction
Switch Attribute Entries
Switch Attribute Entries
Each switch attribute has an entry in Chapter 2. The entry starts with the attribute name and a brief explanation of the
attribute’s purpose.
Note
A few switch attributes apply to the SmartSwitch 6500 only. Those attributes are
indicated in Chapter 2 by the following notation after attribute name:
(SmartSwitch 6500 Only). If that notation does not appear, the attribute applies
both to the SmartSwitch 2500 family and to the SmartSwitch 6500.
After the attribute name and explanation, each attribute entry in Chapter 2 has the following sections: Operators,
Parameters, Descriptions, and Examples.
Operators
If an attribute requires operators, they are listed under an “Operators” heading. Following is a list of all possible switch
operators. If an operator has an alias, it is shown in parenthesis.
Table 1-1
List of Operators
Operator
Action
add (create)
Adds new object
activate
Activates an existing but deactivated object
backup
Backs up switch configuration
clear
Clears (initializes to 0) properties of an object
disable
Lowers privilege level
deactivate
Deactivates an existing object
delete (remove)
Deletes existing object
enable
Raises privilege level
flush
Flushes all entries
modify (set)
Sets properties of an existing object
restart
Restarts LANE clients
restore
Restores switch configuration
setup
Sets up switch
show (display)
Shows properties of an object
start
Starts an object