2-50 SmartSwitch ATM Switch Reference Manual
ClientStat
Console Commands
ClientStat
Use ClientStat to display packet count statistics of LANE or IP/ATM clients on the switch.
Note
Clients on the switch are called local clients.
Operators
show
Parameters
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the
show
clientstat /d
(detailed) command. The (IP/ATM) and (LANE) client indicators after particular parameters indicate
that these parameters display only if that particular client type is active.
Input Parameter
Description
Value/Field Size
Default
[ClientNumber]
Number of the local client.
0-125 or All
All
Output Parameter
Description
[Client]
Number of the client. (Same as the [ClientNumber] input parameter.)
[Type]
Type of client.
[RxPkts]
Number of packets received.
[TxPkts]
Number of packets transmitted.
[RxOctets]
Number of octets (bytes) received.
[TxOctets]
Number of octets (bytes) transmitted.
[Bytes Received]
</d>
Number of bytes received.
[Unicast Packets]
</d>
Number of unicast packets received or transmitted.
[Multicast Packets]
</d>
Interface maximum transfer unit to assign to the local interface associated
with this client.
[Broadcast Packets]
</d>
Number of broadcast packets received or transmitted.
