Cabletron Systems SmartSwitch 2500, Reference Manual

Page: 266 / 402

2-238 SmartSwitch ATM Switch Reference Manual
Privilege
Privilege
Use Privilege to manage the privilege level of the current user.
Operators
show, enable, disable
Parameters
This attribute has no output parameters.
Descriptions
Examples
switch_prompt # show privilege
The current user is Administrator
switch_prompt #
switch_prompt # enable
password: ********
switch_prompt # disable
The current user is ReadOnly
switch_prompt #
Input Parameter Description Value/Field Size Default
[Password] Current password for that privilege level. 0-8 characters No default
Operator Parameters/Permissions Description
show
privilege
All Displays the privilege level of the current user. The two
available levels are Administrator and Read Only.
enable [Password] <currentpassword>
Read Only
Raises the privilege level. There are two levels in the
switch—Read-Only and Administrator. If you are logged on
with a Read-Only privilege status and then issue this
command, the switch prompts you for the Administrator
[Password] before allowing access to Administrator
commands.
disable Administrator Lowers the privilege level from Administrator to Read Only.
No password is required.