SmartSwitch ATM Switch Reference Manual 2-99
LECSELANLEC
LECSELANLEC
Use LECSELANLEC to manage the way an LECS configures (assigns) a LANE client to an ELAN using the
byBestEffort assignment policy. At least one instance of the byBestEffort assignment policy is always in effect at the
lowest priority level. Under the byBestEffort policy, client assignment is based on (in this order): ELAN name in the
configuration request (if any), client IP address, client MAC address (or for a token ring client, route descriptor), client
ATM address. LECSELANLEC also associates a TLV parameter set with the specified LANE client. After the client
is assigned to an ELAN, the LECS uses the TLV information to negotiate the quality of connection given the client by
the ELAN.
Note
Use LECSELANPolicy to set and manage ELAN assignment policies.
Operators
add, delete, modify, show
Parameters
Input Parameter
Description
Value/Field Size
Default
[ATMAddress]
ATM address of the client.
13-20 byte hex-based/
Up to 59 characters
No default
[MACAddress/
RouteDesc]
MAC (media access control) address/Route
Descriptor of the client.
SegId: 0-4095
Bridge Num: 0-15
No default
[Layer3Address(IP)]
IP address of the client.
Dot decimal/
7-15 characters
No default
[ELANNumber]
Number of the ELAN preferred for the client.
0-125
0
[TLVSet]
TLV set number associated with the client.
1-32767
No default
Output Parameter
Description
[Elan #]
Number of the ELAN preferred for the client. (Same as the [ELANNumber] input
parameter.)
[MacAddr/ RouteDesc]
MAC (media access control) address/Route Descriptor of the client. (Same as the
[MACAddress/RouteDesc] input parameter).
[LECAddress]
ATM address of the client.
