2-44 SmartSwitch ATM Switch Reference Manual
Client
Console Commands
Client
Use Client to manage LANE and IP/ATM clients on the switch. Clients on the switch are called local clients.
Note
Use the LANEClient attribute to add or modify a LANE client. Use the
IPATMClient attribute to add or modify an IP/ATM client.
Operators
activate, deactivate, delete, restart, show
Parameters
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the
show
client /d
(detailed) command.
Input Parameter
Description
Value/Field Size
Default
[ClientNumber]
Number of the local client.
0-125 or All
All
Output Parameter
Description
[Client]
Number of the local client. (Same as the [ClientNumber] input parameter.)
[Type]
Type of client.
[IP Address]
IP address of client.
[Server Type]
Specifies what server type the client is on.
[Server Conn]
Status of connection the client has with the server. Possible values are:
Established and Shutdown.
[Status]
Current status of the client.
[Client State]
</d>
Status of where the client is in the process of making a connection.
[Client Address]
</d>
ATM address of the client.
[LAN Name]
</d>
ELAN name for this client.
[LECS Addr Source]
</d>
ILMI, well-known address, or LECS address.