1-2 SmartSwitch ATM Switch Reference Manual
Additional Information
Introduction
Additional Information
You will find a list of acronyms, details about technical support, and an index at the back of this manual. The index
contains page references for all switch attribute sections, command parameters, operators, command descriptions and
command examples. There is also a table of commands at the end of this chapter. It lists all switch attributes by their
operators.
For details on how to use the SmartSwitch 2500 family or SmartSwitch 6500, see the SmartSwitch user guide that
applies. Each SmartSwitch user guide contains task-oriented information on switch configuration, maintenance, and
SNMP (simple network management protocol). Each also contains an overview of switch capabilities.
Conventions
This manual uses the following conventions for instructions and information:
•
Information you enter (console commands and input parameters) is shown in
bold Courier 8
font
and requires a space between the operator and switch attribute.
•
Input and output parameters are shown in [Square Brackets].
•
Input definitions are shown in <anglebrackets>, as joined text and not case sensitive.
•
Filter flags <
/s
> (summary) or <
/d
> (detail) are available with certain show commands and apply
to different information viewing levels. Filter flags require a space between them and the full
command. The
/s
option is the same as the standard default option; the
/d
option provides additiional
details. For example:
switch_prompt # show client /s
ClientNumber(ALL) :
Client Type IP Address Server Type Server Conn Status
==============================================================================
1 LANE 90.1.1.186 LECS Established Operational
3 IP/ATM 90.1.1.124 Local Established Operational
switch_prompt #
switch_prompt # show client /d
ClientNumber(ALL) :
LANE Client 1
==============================================================================
Client State : Operational
Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:00
LAN Name : elan1
LECS Addr Source : ILMI
LECS Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:01
LES Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:02
LAN Type : 802.3
MTU : 1516
IP Address : 90.1.1.186
IP NetMask : 255.255.255.0
IP/ATM Client 3
==============================================================================
Client State : Operational
Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:5A:01:01:7C:00
Server : is local
Server Connection : Established
MTU : 9180
IP Address : 90.1.1.124
