manualshive.com logo in svg

Cabletron Systems SmartSwitch 2500, Reference Manual, Page: 79 / 402

Share
Download
Cabletron Systems SmartSwitch 2500 Reference Manual Download Page 79

SmartSwitch ATM Switch Reference Manual   2-51

Console Commands

ClientStat  

Descriptions

Examples

The examples show statistics for all clients, detail (

</d>

) for all clients, an IP/ATM client, and a LANE client.

switch_prompt # show clientstat

ClientNumber(ALL):

[Error Packets] 

</d>

Number of error packets received or transmitted.

[Dropped Packets] 

</d>

Number of received or transmitted packets dropped.

[Bytes Transmitted] 

</d>

Number of bytes transmitted.

[ARP Requests Sent] 

</d>

ARP requests from a server sent to the client.

[ARP Replies Rcvd] 

</d>

ARP replies from a client received by the server.

[ARP Requests Rcvd] 

</d>

ARP requests from a client received by the server.

[ARP Replies Sent] 

</d>

ARP replies from a server sent to the client.

[Ctrl Frames Sent] (LANE) 

</d>

Number of control frames sent.

[Ctrl Frames Rcvd] (LANE) 

</d>

Number of control frames received.

[SVC Failures] (LANE) 

</d>

Number of clients who failed to join the SVC (switched virtual circuit).

[ARP Unreachables] (IP/ATM) 

</d>

ARP unreachable clients.

[ARP NAKs] (IP/ATM) 

</d>

Number of inverse ARP NAKs (negative acknowledges) received.

[Echo Discards] 

</d>

Number of echo discards.

[Filtered Multicasts] 

</d>

Number of filtered multicasts.

[Flow Failures] 

</d>

Number of flow failures.

Operator

Parameters/Permissions

Description

show 

clientstat

[ClientNumber] <clientnumber>

All

Displays packet count statistics for local clients.

Output Parameter

Description

Summary of Contents for SmartSwitch 2500



















































































































































































































































































































































































































Reviews:

No comments