SmartSwitch ATM Switch Reference Manual 2-91
LANEClient
Use LANEClient to add or modify LANE clients on the switch. (Add a LANE client on the switch if you want to
access the switch console using LANE.)
Note
Use the Client attribute to delete, restart, or show LANE clients.
Operators
add, modify
Parameters
Input Parameter
Description
Value/Field Size
Default
[ClientNumber]
Number of the client.
0-125
0
[LanName]
Name of the ELAN for this client to join.
Up to 32 characters
[ServerType]
Type of LANE server.
LECS, LES
LECS
[ServerAddress]
ATM Address of the LANE server or
LECS. If at a local server, enter the switch
ATM address.
13-20 byte hex-based/
Up to 59 characters
Registered LECS
address
[IPAddress]
IP address of the client.
Dot decimal/
7-15 characters
No default
[NetMask]
IP netmask of the client. Defaults to the
appropriate netmask, based on the class of
the IP address (calculated from the first two
high bits of the IP address, so it is either
255.0.0.0, 255.255.0.0, or 255.255.255.0).
IP netmask must be specified only if IP
subnets are used.
Dot decimal/
7-15 characters
255.0.0.0,
255.255.0.0, or
255.255.255.0.
[MTU]
Maximum transfer unit for the client.
1516, 9234, None
1516
