SmartSwitch ATM Switch Reference Manual 2-47
Console Commands
Client
With the following example (
</d>
), notice how you get the same amount of detail whether you specify the client or
accept the default (All):
switch_prompt # show client /d
ClientNumber(ALL) :
LANE Client 1
============================================================================
Client State : Operational
Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:00
LAN Name : elan1
LECS Addr Source: ILMI
LECS Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:01
LES Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:00:02
LAN Type : 802.3
MTU : 1516
IP Address : 90.1.1.186
IP NetMask : 255.255.255.0
IP/ATM Client 3
============================================================================
Client State : Operational
Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:5A:01:01:7C:00
Server : is local
Server Connection: Established
MTU : 9180
IP Address : 90.1.1.124
IP NetMask : 255.0.0.0
switch_prompt #
switch_prompt # show client 3 /d
IP/ATM Client 3
============================================================================
Client State : Operational
Client Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:00:5A:01:01:7C:00
Server : is local
Server Connection: Established
MTU : 9180
IP Address : 90.1.1.124
IP NetMask : 255.0.0.0
switch_prompt #
