2-24 SmartSwitch ATM Switch Reference Manual
BUSELAN
Console Commands
BUSELAN
Use BUSELAN to manage characteristics of a BUS for a specified ELAN. If an LES corresponding to the BUS exists,
the characteristics of the BUS should match those of the LES.
Operators
add, delete, modify, show
Parameters
Input Parameter
Description
Value/Field Size
Default
[ELANNumber]
Number of the ELAN to which the BUS
belongs.
0-125 or All
All
[ELANName]
Name of the ELAN to which the BUS belongs.
Up to 32 characters
[ConnectMethod]
Type of connection used.
PVC, SVC
SVC
[ELANType]
Data-link type used by the ELAN.
802.3 (Ethernet),
802.5 (TokenRing)
802.3
[Multipoint]
Indicates whether control distribute VCC is
PMP (point-to-multipoint) or PTP
(point-to-point).
Yes: VCC is PMP
No: VCC is PTP
Yes
[MTU]
Maximum transfer unit assigned for this client.
1516, 1580, 4544, or
9234
1516
[ErrorLogEnable]
Whether or not BUS error log is enabled.
Yes, No
No
[MinimumTDEnable]
Whether or not minimum acceptable traffic
descriptor negotiation is enabled.
Yes, No
No
[ForwardPeakCellRate]
Minimum forward peak cell rate.
Positive integer
Output Parameter
Description
[ELAN Number]
Number of the ELAN to which the BUS belongs.
[ELAN Name]
Name of the ELAN to which the BUS belongs.
