2-290 SmartSwitch ATM Switch Reference Manual
SpvcAddress
SpvcAddress
Use SPVCAddress to configure a target address on the switch. The target address allows the switch to act as the target
switch in an SPVC or SPVP connection. The SPVC or SPVP is established (added) at the source switch.
Operators
add, delete, show
Parameters
Descriptions
Input Parameter
Description
Value/Field Size
Default
[PortNumber]
Port number on the switch. (Number
of the physical port used as the
SPVC or SPVP target port.)
A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or Al
All
[AtmAddress]
Destination address to which the
SPVC or SPVP should attempt to
connect (the target address).
20-byte address
Output Parameter
Description
[Port]
Physical port number on the switch. (Same as the [PortNumber] input
parameter.)
[SPVC Target Address]
Destination address to which the SPVC or SPVP should attempt to connect.
(Same as the [AtmAddress] input parameter.)
[Total number of SPVC Addresses]
Number of SPVC or SPVP addresses.
Operator
Parameters/Permissions
Description
add spvcaddress
[PortNumber] <portnumber>
[AtmAddress] <atmaddress>
Administrator
Adds a target address.
delete spvcaddress
[PortNumber] <portnumber>
[AtmAddress] <atmaddress>
Administrator
Deletes a target address.