Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 54 / 240

54/240
If you have an element active (clicked on), you can make the "Object" entry visible in
the upper line of the page of the associated KNX communication object. If you already
had imported group addresses from a KNX project, these can now be assigned (ap-
propriate to the task) per drag & drop to the communication objects from the group ad-
dress window.
If you would like to use new group addresses, you can create main and middle groups
using the small left button in the group address field. The sub-groups can then be cre-
ated using the middle button (important: you have first clicked on the corresponding
middle group).
In addition, you can create and use internal group addresses. These are only used for
the communication within the Busch Comfort Panel. For a subsequent export of all
group addresses, these are not included in the export and are thus also not visible in
the ETS3 project.