Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 113 / 240

113/240
the filter table.
19.5.3.2
KNX --> IP Group telegrams
main group 14+15
(Tab
Basis
)
Via the
KNX --> IP Group telegrams main group 14+15
,
the transfer of group telegrams with main group addresses
14 and 15 from the Sub line to the Main/area line is blo-
cked or enabled. When selecting
Filter
only telegrams with
main group addresses 14 and 15 that are listed in the filter
table are transferred.
19.5.3.3
IP --> KNX Group telegrams
main group 0-13
(Tab
Basis
)
Via the parameter
IP --> KNX Group telegrams main
group 0-13
is used to block or enable the transfer of group
telegrams from the Main/area line to the sub line. When
selecting
Filter
only telegrams that are listed in the filter
table are transferred.
19.5.3.4
KNX --> IP Group telegrams
main group 0-13
(Tab
Basis
)
The parameter
KNX --> IP Group telegrams main group
0-13
blocks or enables the transfer of group telegrams with
main group addresses 0 and 13 from the Sub line to the
Main/area line. When selecting
Filter
only telegrams with
main group addresses 0 and 13 that are listed in the filter
table are transferred.
19.5.3.5
IP --> KNX Physically
addressed telegrams
(Tab
Physical address
)
The
IP --> KNX Physically addressed telegrams
parameter
is used to set the transfer of physically addressed telegrams
from the main/area line to the sub line (e.g. programming
an application or for diagnostics purposes during the en-
quiry of the device state).
Filter
,
Block
and
Transfer
can be
set.
With the
Transfer
setting, the IP router only transfers tele-
grams with a physical address as target address if they
match the subordinate side (TP or PN connection of the IP
router). The IP router's own physical forms the basis for
the synchronisation.